86-15345081085 
admin@xheatpress.com
What if you don't have a sublimation machine by your side?
You can use an iron to sublimate the pattern, please turn off the steam function.
Or you can also try to draw directly on it.
Any machine that can be heated can be used for thermal transfer, you only need to meet three conditions:
1. Make sure the temperature reaches 350°F/180°C.
2. The temperature is heated evenly.
3. You need to make sure that the pressure applied to each position of the blanks is the same during the transfer process.
Method of Operation:
1. The temperature of the transfer machine must be set between 180 - 200 centigrade/ 350 - 392 Fahrenheit, which is suitable for heat press transfer.
2. Tear off the protective film, preheat the blank board for 5 minutes to remove moisture, then cover the transfer paper with the pattern side on the blank board.
3. Press down at moderate pressure and wait for 40 seconds to complete.
Detail Introduction
● 【Package Include】modacraft 80 Pcs sublimation keychain blanks set comes with 20pcs square sublimation blanks, 20pcs Keychain Tassels in 10 Colors, 20pcs keychain rings, and 20pcs jump rings. Suitable for sublimation keychain projects and crafts.
● 【High-Quality Blanks】The sublimation keychain blanks are made of MDF blank board that is lightweight and hard, not easy to break and deform. In a suggested heating setting, you don't need to worry about any kind of crack and deformation.
● 【Protective Film】All the square sublimation blanks are covered with protective film on both sides. Peeled them off when you are ready to use the blanks. This protective layer keeps the sublimation ornament from scratched or dirty.
● 【Wide Appliacation】The sublimation blanks keychain bulk can be printed on double sides. Suitable for DIY sublimation blank keychains, zipper pulls, backpack bag tags, ornaments, gift tags, pendant decoration, souvenirs, and many other craft projects.
● 【Warm Tips】The suggest heating temperature is 350℉ and the suggested heating time is 40 seconds. It is better to preheat the sublimation blank before formal heating to reduce moisture. Please note do not heat the blank for a long time in case the blank break. IF YOU HAVE ANY PROBLEMS, PLEASE FEEL FREE TO CONTACT US.
